Modul Pwm Bipolar Dan Unipolar Dengan Memanfaatkan Teknologi Digital Edisi 2022
Bipolar And Unipolar Pwm Module By Utilizing Digital Technology 2022 Edition
Kevin Galih Rayhantama, Andhika Prasetya Abimanyu
Currently PWM technology is still developing so that existing electronic applications are also developing. Equipment that uses a lot of transistors began to be abandoned and replaced with smaller packages accompanied by certain functions called IC (Integrated Circuit). Therefore, the use of IC is not spared from analog-digital system circuits. In particular, it has been widely applied to PWM (Pulse Width Modulation), which is a way of manipulating the signal/voltage width in a period, namely the Duty Cycle.There are several types of PWM, one of which is Bipolar and Unipolar PWM. Which produces more than 2 outputs where each other has a different phase. Setting the PWM value is done using an Arduino microcontroller with a program designed to produce Bipolar and Unipolar PWM. Arduino will be connected to the H Bridge circuit. The H Bridge circuit is a circuit that is used to control the direction of DC motor rotation. The H Bridge circuit consists of 4 transistors which function as a switch which allows the motor to rotate clockwise or vice versa. In this module, the H Bridge circuit is added with a diode component that can conduct current in one direction and block the reverse current. Test results on this module were obtained from several PWM signal and output tests using an oscilloscope and the direction of motor rotation which can run properly. The purpose of making this module is to support practical learning for Electrical Engineering students at Malang State Polytechnic.