Rancang Bangun Cooling System pada Panel Surya Tipe Monocrystalline 100 WP Berbasis Mikrokontroler
Cooling System Design on Monocrystalline 100 WP Solar Panel Based on Microcontroller
Tegar Wildan Syahputra, Haidar Samau'al, Erik Prasetya Wardana
This plant is a power plant that is sourced from sunlight, so it is a renewable power plant, cleaner, inexhaustible, and environmentally friendly. According to BPPT (2017), Indonesia is in the equatorial zone with an average solar radiation of 4.8 kWh/m2 /day, so that this has the potential to build a large PLTS. But behind its excellent prospects, PLTS has a weakness when the temperature exceeds the optimal temperature limit. Therefore, a cooling system is needed to maintain the temperature so that the temperature on the PV panels is maintained and can produce electrical energy properly. The method used in designing this tool begins with literature studies, consultations, testing and analysis so that the results of data collection are obtained by comparing the output power of solar panels without a cooling system and by using a cooling system. The design of this tool uses several components in its preparation, such as: Monocrystaline Panel 100 Wp, Arduino Nano, DS18B20 Sensor, Relay Arduino, 16x2 LCD, 12V 44 Ah Battery, and Box X6. The results of data collection show that this tool is effective in maintaining the optimal temperature of the solar panels. When without using a cooling system, it produces an average output power of 71,04 °C per day, while when using a cooling system it is able to produce an average output power of 77,81 °C per day.