Pemodelan dengan Metode Recursive Least Square (RLS) dan Desain Kontroller PID pada Plant Suhu Menggunakan Labview - MyRio
Modeling with Recursive Least Square (RLS) Method and Design of PID Controller at Temperature Plant Using Labview - MyRio
Modeling is one of the method from identifying a dynamic system whose parameters are not known by the designer. The steps of modeling are collecting system input and output data, parameter estimation and model validation. The modeling in this research uses LabView and MyRio. The purpose of this research is to distinguish between an accurate model and an inaccurate model. The modeling uses on the temperature plant which aims to make the temperature in a stable condition, by controlling the fan motor speed. The method uses in this research is the method of Recursive Least Square (RLS) and Proportional Integral Derivative (PID) control. The RLS method is used to determine the calculation results that will be included in the transfer function which aims to minimize errors. The PID method is used to control the fan motor speed in order to obtain steady-state results. This research is resulted that the 0,0016 3s transfer function H (s) e with parameter value of P = 10,99 ; I = 0,09173 ; S 0,0039 D = 160,6. However under this research PID controller can’t be used in this model.