Collision Avoidance pada Mobile Robot Menggunakan Kontrol Kinematik
Collision Avoidance in Mobile Robot Using Kinematic Control
Automation device and robotics have unlimited effectively used in the industrial sector but has entered the health, business, even social sector. The robot function is frequently found in the navigation function, where the robot has to move to the destination point. To work efficiently, the robot has to move flexibly and not hit the object around it. Therefore, a robot that can move flexibly in all directions based on linear cartesian coordinate x and y, and z in angular, and not hit the object around it has developed. To make the robot move to the destination point, a kinematic control is used. Kinematic control method allow either arm robot, flying robot, or wheeled robot to move to a desired posisition towards the reference. A controlled movement allowed the user to give an order to the robot to move to the destination point. By knowing where the object or obstacle was before, the robot can be ordered to move to the point where the robot will not hit the obstacle. Based on realtime testing, the robot can move from the destination coordinate point [3.4] in the final facing direction of 45°, with the coordinates of the robot's final position [3,052, 4,059] and the facing direction to 47,211° within 17.5 seconds.