Desain dan Analisis Pengaruh Parameter PI pada Respon Sistem Kontrol Arus Purwarupa Kendaraan Listrik
The Design and Analysis of The Effect PI Parameters in Response of Flow Control System for Prototype Electric Vehicle
Currently in Indonesia, many electric vehicle manufacturing is done by prioritizing energy savings, because it is considered more efficient than vehicles that use fossil fuels. The main obstacle in making electric vehicles is the electric motor control system, usually electric vehicles use a type of BLDC motor. To control this motor very precisely, an encoder sensor is needed to read the motor rotation with high accuracy and a motor controller that can adjust the motor current precisely. Based on the problem, this research is intended to create and analyze a motor current control system, by using an odrive motor driver and PI control, so that the PI parameter values can be obtained to get a stable motor current control system at certain loads that can be accepted by electric vehicle prototypes and also can produce a stable system with a small error when the system is working This study used experimental research methods to determine the effect of load variations and PI constants on the stability of the current control system. The test was carried out by taking 25 experiments with varying loads of 1 kg, 2 kg, 3 kg, 4 kg, 5 kg. And change the value of the PI constant kp and ki. The data analysis technique uses Two Way Anova to find out the significance value on load changes and PI constant values. The results of the study showed that the variation of PI constant values had less effect on the stability parameters of the system at rise time and overshot. As for the load variations, it affects the stability parameters of the system, especially in steady state error.