Troubleshooting Dan Perbaikan Brake Pressure Indication Low/Zero Dan Autobrakes Grab Upon Landing Pada Sistem Autobrake Pesawat Udara
Troubleshooting And Repair Brake Pressure Indication Low/Zero And Autobrakes Grab Upon Landing On Autobrake System Aircraft
The autobrake system is a system that functions to reduce the speed of the aircraft when it is about to carry out a Rejected Take-Off (RTO) or a landing which is run automatically by a computer, making it easier for pilots to brake safely. Problems that often occur with autobrake are the brake pressure indication low/zero and the autobrakes grab upon landing, which make it difficult for pilots to brake safely. The purpose of troubleshooting and repair is to find problems, source causes and fix problems with the aircraft autobrake system. The method of troubleshooting brake pressure indication low / zero and autobrakes grab upon landing is done by checking the leak, servicing and replacment. The results of the troubleshooting are to find the problem, the source of the problem and fix the problem for the brake pressure indication low/zero and autobrakes grab upon landing. The problem of the brake pressure indication low/zero occurs because of the leakage of nitrogen gas at the tube joints of the brake accumulator. The autobrakes grab upon landing problem occurs due to damage to the autobrake pressure control module valve which is not working optimally to control the hydraulic pressure used for braking. The result of improvement is that the autobrake system can be used in accordance with the specified airworthiness standards.