Alat Solder Reflow Conveyor Skala Kecil

Small Scale Reflow Conveyor Soldering Tool

YUSI RAHMA PUTRI, MUHAMAD FUAD FARIS

PCB SMT is a type of PCB whose constituent components are SMD components, to do soldering of these components on the PCB using soldering techniques called soldering reflow, namely tin paste located between the surface of the PCB and the feet of the components heated with 3 levels of heating that gradually utilize heat energy from the outside and not directly like conventional soldering techniques, then tin paste will experience the soldering process by itself at the feet of SMD components. This technique should pay attention to the stability of the heating temperature, that is: preheat 150°C, soak 200°C, and reflow 250°C, so that the tin is successfully soldered well and the component does not have malfunction due to overheating. Therefore, in this Final Project is made a small-scale conveyor reflow solder tool by utilizing PID Ziegler-Nichols 1 method as a controller stabilizing heating temperature and motor speed, ESP32 38 pins variant as microcontroller, 3 halogen lamps 500W 220V as heater, thermocouple type-K and MAX6675 as lamp temperature sensor, speed sensor and DC motor 12V as belt conveyor drive that serves as PCB delivery to be soldered to the heating area, and a 20x4 LCD as a light temperature and motor speed viewer.

Kata kunci

© 2026 UPA Perpustakaan POLINEMAStatus LayananKebijakan PrivasiSyarat & Ketentuan

v2026.11.17.5 · 54e4f54