Analisis Selector Switch pada Windshield Wiper System Pesawat Boeing 737-800 NG

Analysis of Selector Switch on Windshield Wiper System Boeing 737-800 NG

ADITYA GHIFFARI RUKMANANDA

The windshield wiper system is one of the important systems on the Boeing 737-800 NG aircraft during takeoff, landing, and in flight which refers to ATA Chapter 30 in the Aircraft Maintenance Manual (AMM), namely Ice and Rain Protection. This system works to clean rainwater on the windshield (cockpit window). The working principle of the windshield wiper system is to work when the switch on the windshield wiper selector is in the INT, LOW, and HIGH positions. Then the windshield wiper will work at a certain speed. In the process of operational testing, the windshield wiper must be in a wet condition. Because if in a dry position, the wiper will damage or cause injury to the windshield. The problem that arises with the windshield wiper system is that the switch cannot work in any position. To find out the location of the fault in the component, an operational test is carried out. There are three stages of electrical power check, wiring check, and replacement of the windshield wiper selector switch. After knowing the error, we can do troubleshooting by looking at the procedures available in the Fault Isolation Manual (FIM) and Aircraft Maintenance Manual (AMM).

© 2026 UPA Perpustakaan POLINEMAStatus LayananKebijakan PrivasiSyarat & Ketentuan

v2026.11.19.1 · c557b04