Analisis Kerusakan GPS BUS pada Boeing 737-800
Failure Analysis on the Boeing 737-800 GPS BUS
MUKHAMMAD IQBAL RESYDIAN ELMUZAKKI
Navigation is the science of moving vehicles or people from one place to another. In navigating, humans use various tools as guides. In the aircraft navigation system, various devices are used so that the aircraft can go to their destination safely. One of the navigation systems on aircraft is GPS (Global Positioning System), GPS works like DME (Distance Measuring Equipment). Where signal emitted by satellite is calculated by the time it takes for the signal to reach the GPS receiver on the aircraft. GPS on aircraft is an important part of the navigation system, because many other systems use GPS navigation data, including FMC (Flight Management Computer), GPWS (Ground Proximity Warning Computer), and IRS (Inertial Reference System), in distributing the data, GPS uses ARINC 429 as the data bus. In the process of working, a tool / component can certainly experience errors or problems. Problems that occur must be solved immediately so that they do not spread to other systems that could cause injury to humans. Due to the operation of the GPS must always be in a state of airworthy, then the maintenance process in accordance with the guidelines that have been given by the manual needs to be done. In the GPS bus troubleshooting procedure, we can take the steps shown in the Fault Isolation Manual 34-46 TASK 830. Various stages of maintenance are carried out starting from the BITE test process, until the aircraft is declared to be returned to service, have been explained in detail in this Fault Isolation Manual.