Pengaruh Variasi Material dan Variasi Diameter Cutter terhadap Tingkat Getaran pada Proses Milling dengan menggunakan Magnetic Holder

The Influence of Material Variations and Diameter Cutter Variations on Vibration Levels in the Milling Process Using Magnetic Holders

FAUZY ADNAN

Metal milling machining process is basically to reduce the material in the workpiece in accordance with the desired dimensions. Many factors affect the vibration level of an object, one of which is vibration caused by the machine during the machining process. The vibration caused by the machining process occurs from the vibration of the machine itself, the material, and the choice of cutter material. To reduce the occurrence of vibrations in the machining process, this researcher uses permanent magnets and Magnetic Holder as a tool to reduce vibration. The purpose of the study was to determine the results of the analysis of the use of Magnetic Holder in the machining process with a variety of Aluminum, S 45 C, and Brass material as well as variations in the diameter of the cutter 12 mm and 16 mm with a depth of cut 1 mm to the level of vibration in the milling process using Magnetic Holder. The analytical method used in the study is Two Way Anova with the null hypotheses: 1) there is no effect of material variations on the level of vibration using a Magnetic Holder; and 2) there is no influence of the diameter of the cutter on the vibration level using a Magnetic Holder. The results of the study are that there is an influence of material variation and variation of cutter diameter on the vibration level in the milling process using Magnetic Holder. The most significant vibration damping results occurred in brass material which decreased the amplitude value by 20% using a 16 mm diameter cutter.

Subjek

© 2026 UPA Perpustakaan POLINEMAStatus LayananKebijakan PrivasiSyarat & Ketentuan

v2026.11.19.1 · c557b04