Implementasi Metode Preheat pada Lasan Bucket Loader dengan Material ASTM 516 Grade 70

Implementation of Preheat Method in Bucket Loader Welds with ASTM SA516 Grade 70 Material

JAMEZ ALFERO TAMBUNAN

Welding is a metal joining process by heating it until it melts, where the workpiece that melts or melts will be fused with the help of additional materials, so that a connection is formed. Where the melting of the added material or electrodes is caused by the transfer of electric current to the workpiece. In doing this research in the process of heating the material / preheat before doing the welding process. The purpose of the process of this study was to determine differences in the strength values bending test, the connection Butt Joint steel plate ASTM SA 516 grade 70 on FCAW welding process. Specimens tested bending form face bend at 24 test material and then the data that can be in kelolah using DOE factorial results were known that the temperature perheat can affect thestrength, bendingthe current 144 ampere has astrength bending better, and a combination of preheat and ampere with an ampere value of 144 ampere and Preheat 250 ℃ resulted inaverage value ofstrength bending a much better.

Kata kunci

© 2026 UPA Perpustakaan POLINEMAStatus LayananKebijakan PrivasiSyarat & Ketentuan

v2026.11.18.1 · 8c68a2b