Analisis Eksperimental Roda Gigi Helix menggunakan Getaran
Helix Gear Experimental Analysis using Vibration
This study aims to analyze the frequency gearmesh on the gear , to analyze the amplitude on the gear , and to analyze the gearmesh sideband signal on the gear as an indication of damage to the gear. This research method uses a gear test equipment using an electric motor 1000 rpm. The gears used are 5-piece helix gears. With conditions normal helix gear, worn helix gears on shaft holes, helix gears whose teeth are half broken, helix gears whose teeth are broken and a helix gear is broken. After getting the data that matches the data, it is processed using the one way ANOVA method. The results showed that with a spin of 100 rpm, the experimental results obtained gearmesh frequency for normal helix gear = 25.07 Hz, worn helix gears on shaft holes = 119.24 Hz, helix gears whose teeth are half broken = 13.88 Hz, helix gears whose teeth are broken = 33.15 Hz, and broken helix gear = 18.28 Hz, with amplitude value of each gear that is, normal helix gear = 4,0004, worn helix gears on shaft hole = 19.88,helix gears whose teeth are half broken = 34.05, helix gears whose teeth are broken = 13.14 and broken helix gears = 46.88. The gearmesh sideband signal appears as an indication of damage in accordance with the level of damage and the greater the damage that occurs the more gearmesh sideband signals occur.