Perawatan Pompa Sentrifugal dengan Metode Reliability, Availability, Maintanability dan Safety (RAMS) serta Simulasi Operating Characteristic Curve

Maintenance of Centrifugal Pump with Reliability, Availability, Maintainability and Safety (RAMS) Method and Operating Characteristic Curve Simulation

TRI SUHARNO

Centrifugal pump is a type of pump that is often find in every building and industry. In the use of a tool, thorough attention sauth big event operation and maintenance are need to be noticed very much. Maintenance is one of important factors that must be done to maintain the reliability and maintainability of tools or machines. The effective and efficient maintenance method will affect on increasing productivity of the production system. Reliability, Availability, Maintainability dan Safety (RAMS) are development methods of Preventive Maintenance for analyzing overall-attribute value function to maximize effectiveness and efficiency of the maintenance. This study is to make Fault Tree Analysis (FTA), Failure Mode Effect and Critical Analysis (FMECA), calculating the value of reliability, availability, maintainability, and making the safety assessment. This study is also accommodate making operating characteristic curve simulation to understand the characteristic of the tested pump by calculating all obstacles in the pipeline and pressure generated. The result of preventive maintenance by RAMS method, based on FTA 4 basic events have been identified as the cause of pump damage is shaft damage, leakage, impeller damage and cavitation. Based on FMECA, critical components in the pump are wearing ring, shaft, wearing ring casing, shaft sleeve dan stuffing box. Based on the calculation of RAM from maintenance that has been running for one year, the reliability value obtained for 93.2%, the availability for 93.2% and maintainability for 86.8%. And based on the results of the simulation operating characteristic curve null is rejected hypothesis, which proves that the influence of discharge and piping path to the total head maximum produced by centrifugal pumps tested

© 2026 UPA Perpustakaan POLINEMAStatus LayananKebijakan PrivasiSyarat & Ketentuan

v2026.11.19.1 · c557b04