Analisis Variasi Susunan Header Knalpot terhadap Kebisingan
The Analysis of Variation of Complete Header for Noise
In general, the exhaust system or often called the exhaust, is a vital part of a motor vehicle. Because of that in the automotive sector this product has a very rapid development and has an increasing customer base. Exhaust system is a exhaust gas recovery system consisting of exhaust manifold (header), catalytic conventer, resonator, and muffler. This muffler serves as a sound damper that is released from the engine to the level of noise that is allowed with a slight possibility of a decrease in the torque and power of the engine. The exhaust gas of the vehicle that is channeled through the exhaust into the outside air. The parts in the exhaust are designed in such a way as to float the combustion gases from the engine can also muffle the sound. The purpose of the study is to analyze the effect of 4-2 header modification exhaust changes on the noise level produced by the 1300cc engine. The study method used is carried out by preparing standard headers and modifications, using from Rp. 800, 1000,1500,2000,2500,3000,3500 and 4000 Rpm. Analysis includes the level of noise using the open throttel variable. The results of the study are that the 1.25 inch header diameter produces a maximum value of 88.7 dB, at a 1.5 inch diameter resulting in a maximum value of 89.5 dB, and a 1 inch diameter produces a maximum value of 87.9 dB.