Perencanaan Perawatan dan Perbaikan Condenser Vacuum Pump Type 200EVMA Periode Tahun 2020 s.d. 2022
Maintenance and Repair Planning Condenser Vacuum Pump Type 200EVMA Period 2020 Until 2022
Condenser vacuum pump is one of the most important parts of the electricity generation process at PT. PJB UBJOM Pacitan, where the vacuum pump condenser functions as a support for the vacuum system to reduce the condensation temperature. Besides the vacuum pump also sucks steam from the condenser, then indirectly helps move heat from the condenser and the temperature of the condenser will go down. Often the preventive maintenance of the pump is neglected, because maintenance activities are carried out only when the pump is damaged (corrective maintenance). Some disturbancesn that often occur in the condenser vacuum pump include, vacuum drop, vibration, the casing is too hot, the bearing is too hot. Therefore it is necessary to plan maintenance and repairs so that the vacuum pump condenser can operate effectively, avoid sudden damage and to achieve the best posibble maintenance costs. The method used in the planning of maintenance and repair of vacuum pump condensers is ISMO (inspection, small repair, medium repair, overhaul) and calculates the estimated maintenance and repairs cost. Based on the treatment with the ISMO method for 3 years, the maintenance and repair schedule is obtained which consists of 9 times of inspection, 6 times of small repair, 2 times of medium repair, and 1 time of overhaul for the period 2020 to 2022. Total estimated costs for maintenance and repair of vacuum pump condensers for the period 2020 to 2022 amounting Rp. 72,365,879.00