Pengembangan Kontroler Motor BLDC Open Source untuk Kendaraan Listrik
A Development of an Open Source BLDC Motor Controller for Electric Vehicles
IFFANUL HANIFA, HAFIZ BAKHTIAR
The use of this BLDC motor requires a controller to control it. At this time the use of IoT (Internet of Things)-based controllers is growing, with IoT monitoring and remote control being applied to controllers. However, with the limited battery power used, the microcontroller must be able to work IoT, and of course save on battery power consumption. This study analyzes the consumption of the ESP32 which has five different power modes with the aim of obtaining a microcontroller for the BLDC motor controller that can support the IoT system and be efficient in the use of battery current. The method used in this study is experimental research methods, by giving a treatment to the object of research, then evaluating the influence caused by the object of research. The object of research in this case is ESP32, the treatment given is to include variations of five types of ESP32 CPU modes, namely, Active Mode, Modem Sleep Mode, Light Sleep Mode, Deep Sleep Mode, and Hibernation Mode. The results of this study indicate that the ESP32 mode affects the current consumption of the battery. From this study, the following results were obtained, in Active Mode the current consumed is 165 mA, Modem Sleep Mode current consumed is 40 mA, Light Sleep Mode current consumed is 13.5 mA, Deep Sleep Mode current consumed is 12, 1 mA, and Hibernation Mode current consumed is 12.1 mA. With the battery life obtained in active mode it produces a battery life of 2.34 days, then in modem sleep mode it produces a battery life of 9.6 days, then in light sleep mode produces a battery life of 28.6 days, then on deep sleep mode delivers 31.9 days of battery life, and hibernate mode delivers 31.9 days of battery life.