Aplikasi Wireless Sensor Network Untuk Sistem Pintar Pada Greenhouse
Wireless Sensor Network Application For Smart System Greenhouse
Nowadays, the population growth increases significantly. Based on the data from Statistics Indonesia (BPS) in 2010, Indonesian population reaches 237.641.326 million people, and increase to 261.890.900 million people in 2017. Because of the large population number, it is necessary to increase the number of food. In this case, greenhouse, as a modern technology is necessary to be used to fulfill the demand. Greenhouse is a modern way (or tools) in a farming technique. Farmers can fill up the greenhouse with any horticultural plants without considering seasons. We use wireless sensor network to monitor and control the greenhouse's temperature, air humidity as well as soil moisture. Multi-hop routing technique is designed to allow communication among nodes and communication between node and sink node. After the testing we obtained that the BER (Bit Error Rate) value gained was 0.2 or 20% from 1000 times of data transfer with 200 times of error. In this research, We used NRF24L01 as the transmitter and receiver device. The specification was 2.5 meter for maximum range, using a multi-hop routing for the communication, and the output power was 0 dBm.This was intended to minimize the chance of data transfer failures.