Rancang Bangun MPPT (Maximum Power Point Tracker) pada Solar PV Tipe Constant Voltage (CV) dengan menggunakan Zeta Converter
Design of MPPT (Maximum Power Point Tracker) on Solar PV Constant Voltage (CV) Type using Zeta Converter
The energy of light generated by the sun can be converted into electrical energy using a device that is a solar cell or photovoltaic (PV). To improve solar PV performance, a solar energy conversion controller is required to generate maximum power despite adverse weather conditions. Performance improvements can be made using Maximum Power Point Tracker (MPPT). MPPT is a method of finding the maximum point of voltage and input current (V-I) characteristic curve in solar PV applications. One example of MPPT support is dc-dc Converter. Many types of dc-dc converters can be used such as buck, boost, buck-boost and others. One example of dc-dc converter that can be used to set voltage on solar panels to generate maximum power on solar panels. Zeta Converter is a development of buck-boost converter by producing ripple low output voltage and polarity similar to the input voltage polarity on the converter. Therefore, to get the maximum output voltage selected by using MPPT (Maximum Power Point Tracker) on solar PV type Constant Voltage (CV) using zeta converter method. With this method will be assisted by a dc-DC converter of constant voltage type. Based on the design of MPPT ( Maximum Power Point Tracker) type Constant Voltage (CV) using Zeta Converter can be known that the series design is suitable and can work properly. Based on the results of the series analysis can be known that MPPT ( Maximum Power Point Tracker) type Constant Voltage (CV) with Zeta Converter produces a variety of outputs when given various prisoners. Based on the results of the analysis of the test without load, it can be noted that the stable output voltage of 14V of input voltage of 9-24V and duty cycle produced is lower when the input voltage is higher with the highest value of 60% and the test results in the load is known that it produces 89% efficiency and achieves the desired voltage on duty cycle 80%-90%.