Pengembangan Prototype Telemonitoring System Pembebanan Motor 3 Phase Menggunakan Prinsip Internet Of Things (IoT)

Developing Of Three Phase Motor Loaded Telemonitoring System Principle Using Internet Of Things (IoT)

BRAINY TAWADHU IMANI ZEIN

Telemonitoring is a remote monitoring activity that utilizes facilities and computer systems to manage data access from several zones. Telemonitoring is the process of getting information or data. Data is a measurement result of measuring instruments, such as voltage value, current value, power value, power factor etc. Telemonitoring is one of the development of telecommunication technology. Telecommunication itself can be interpreted as a process of information distribution between places separated by long distance through networks connected to one another Based on the results of tool design using vamp 40, vampset software, elipse software and python software, it was found that the measurement results were valid. The measurement results in the elipse software must be calibrated first with other measuring devices such as fluke power quality analyzer or vampset so that it shows accurate values. Tool testing is done by changing the R phase current value using a dimmer to get the lowest values that are phase R = 0.09 A, phase S = 1.66 A, phase T = 1.59 A, and cause the current harmonic value to rise in R phase = 99%, S phase = 3.5%, T phase = 5.5%. In some experimental results the current harmonic value exceeds the standard value of 15% in the range 100-1000 (IEEE 519-1992). Then the smaller the current from the nominal current by turning the dimmer, the higher current harmonic value increases because the wave is no longer sinusoidal.

© 2026 UPA Perpustakaan POLINEMAStatus LayananKebijakan PrivasiSyarat & Ketentuan

v2026.11.18.2 · ee0bb0b