Implementasi Alat Kualifikator Susu Sapi Berdasarkan Berat Jenis Dan NIlai pH Berbasis DCS ( Distributed Control System) Menggunakan Metode Logika Fuzzy
Implementation Of a Cow's Milk Qualifier Based On Density And pH Value Based on DCS (Distributed Control System) Using Fuzzy Logic Method
Because of the increasing number of sales of milk with inappropriate quality in a number of KUD’s in milk-producing areas, a cow's milk qualifier has been developed. The creation of a milk qualifier aims to make it easier to distinguish between proper milk quality, tolerable quality or it can be called still decent and inappropriate quality which means that the milk is not suitable for sale or consumption. The working principle of this qualifier is to determine the pH value and specific gravity of the load cell, water level, and pH sensor readings. For load cell sensor settings using a lead or scale, while for water level sensor calibration using the available size in the measuring cup, for setting the pH sensor calibration using a tool called a pH meter which functions to measure the pH content in a solution with an accuracy level of 0 , 1 and using a buffer liquid to be more accurate in the pH sensor readings. From the reading of these three sensors will be processed by the DCS controller (Distributed Control System) and use the fuzzy logic method as a determination of the proper, tolerable, and inappropriate milk conditions. The fuzzy method itself is carried out directly in the DCS (Distributed Control System), namely the SFC (Sequential Function Chart) section. For milk with proper conditions has a pH value of 6.0-6.9 and a specific gravity of 1.0250 - 1.0235, milk in an unsuitable condition has a pH value <6 and> 7 with a specific gravity of <1.0250> 1.0235 . In system testing, the average error obtained from the pH sensor reading is 1.2%, for load cell sensors the average error is 0.4%, and for water level sensors the average error is 1.26%.