Kinematic Control Robot Omnidirectional dengan Penggerak 4 Roda Mekanum
Kinematic Control Robot Omnidirectional with 4 Mecanum Wheel
The rapid development of technology in this era has an impact on the technology used by an industry. The work that is done by human hands can be arranged with automation technology with a machine or even a robot. The purpose of using robots in industry is to ease human work and maintain the quality standards of the products produced. One of the various types of robots is the Wheeled Robot. In this type of wheeled robot has 2 types of movers, namely Holonomic and Non-Holonomic. This holonomic drive system has high work flexibility. The robot that can implement this holonomic system is the Omnidirectional Drive robot. To be able to move the robot in a controlled manner, a modeling called Kinematic Control method is needed. The Kinematic Control Method is a method for moving control (kinematics) of a robot using its dynamic equations. To be able to move the robot continuously, feedback is needed so that if there is an error it can be corrected. The feedback that used is the robot wheel’s speed detected using an encoder sensor. From the results of the design and testing that has been done, it can be analyzed that the control system design can influence the robot to move in a controlled manner towards a destination. The use of an encoder sensor as a parameter in robot control affects the robot's response. However, the use of the sensor encoder is still in less than optimal language. This is because the encoder sensor is very prone to read errors due to wheels slipping against the track.