Implementasi Efek Rumah Kaca Hybrid Pada Proses Pengeringan Bunga Cengkeh Berbasis Fuzzy Logic
Implementation Of Hybrid Greenhouse Effect On Clove Flower Processing Based On Fuzzy Logic
Basically clove flower drying is done by drying, indeed this does not require a lot of cost but is very dependent on weather and climate conditions (Nanik, 1991). The drying process is also used to avoid clove decay if stored in wet conditions. In dry season conditions cloves are dried for 4 to 5 days with an average drying time of 8-10 hours, while in the rainy season the drying process lasts for 6 to 10 days even more depending on the intensity of light. To overcome this, artificial drying is needed to facilitate the clove drying process. In the case of this artificial drying process carried out in a careful manner so that the quality remains high by reversing cloves during drying this is intended to dry the clove evenly and be carried out at a minimum temperature of 40 ° C and a maximum temperature of 60 ° C (Septyanto, 2015). For this reason, drying can be done with translucent buildings with the greenhouse principle as a substitute for direct drying (Triwahyudi, 2009). In this study the sensor used to detect temperature changes is the LM35 sensor. By applying fuzzy logic as a temperature controller, the temperature response to time has a delay time = 218 s, rise time = 436 s, maximum overshoot = 2,04%, and peak time = 1046 s with temperatures reaching 50.29 ° C.