Implementasi Linear Quadratic Optimal Control Untuk Stabilisasi Sistem Reaction Wheel Pendulum
Implementation Linear Quadratic Optimal Control For Reaction Wheel Pendulum
Reaction wheel pendulum is a non-linear system and an underactuation system. Non-linear system and underactuation chacarteristic are an ideal example studying control systems. Reaction wheel pendulum is a simple pendulum with rotating disk. The rotating dik attaches to the dc motor shaft and teh couplingtorque between the propeller and pendulum can be used to control teh motion of the system. In this study using a rotary encoder sensor to detect the angle of pendulum. Infrared sensor for detecting the relative speed of the wheel. The controller by ATMega, as well as the dc motor is uses to drive the roatting disk pendulum is at 0° (180° or 90° from the ground). The control method used is optimal linear quadratic optimal control. The optimal linear quadratic method is to find the reinforcing value of the reciprocal system that can maximize used is optimal for the system response generated.This method requaires mathematical modeling for the reaction wheel pendulum using the linear model has been derived with absolute angles. Mathematical modeling is to get the state value of the variabel that will be used in the state space equations.Then the weighting value of Q as an optimization function that will produse reciprocal reinforcement value (K) for the system stabilization. The value of K is [[-4.9870 -1936.9 -190.12]. This value can make the system stable with a minimum cost function.