Troubleshooting Audio Control Panel 5145-1-64 Pada Pesawat Boeing 737-800

Troubleshooting Audio Control Panel 5145-1-64 on Boeing 737-800

AHMAD ALFAN FEBRIANSYAH

The level of comfort and safety should be the priorties. One of the most important things is the audio settings on all parts of the aircraft, if the information received by the pilot is not the same as the information sent will result in an error triggering the flight. Such as destination location errors, errors in the warning readings, error of decision-making errors, and other things that are fatal. The objective of this final report is to know how to work, how to take care, and analyze the results of the instruments in the Audio Control Panel. In the treatment process consists of several stages, namely test, disassembly, cleaning, check, repair, and storage. These instruments usually have errors on broken switches, dirty components and dead lighting. If the switch is damaged can be caused by the harm to the operation of the switch, it should be done repair, and if the repair is not possible it should be replaced. If the component is dirty, it should be cleaned in the dirty parts. If damaged lighting can be a bad wiring or a lamp that has been damaged. So need to be done continuity check but when the lamp is broken then it should be replaced the new one. After doing the repair process should be done operational test. If the Audio Control Panel is not experiencing interference such as the proper functioning of the switch, the lighting illuminates as it should, and the Audio sounds as desired. Then the Audio Contol Panel can be said in good condition. This is done so that the instrument is always in good condition and works as it should.

© 2026 UPA Perpustakaan POLINEMAStatus LayananKebijakan PrivasiSyarat & Ketentuan

v2026.11.19.1 · c557b04