Troubleshooting Marker Beacon System Pada Pesawat Boeing 737 - 800NG
Troubleshooting Marker Beacon System on Boeing 737 - 800NG Aircraft
ADJENG WIDATI KINTAN PANGASTUTI
Marker beacon is included in the VHF (Very High Frequency) that is used in the flight. Related to aircraft landing system or Instrument Landing System (ILS). Marker beacon means of determining the position along the route set to the destination such as the runway. It serves as a transmitter that provides remaining information of the aircraft distance to the landing point. To know the damage of marker beacon is done BITE test and operational test. Marker beacon is usually damaged, normal indication, audio tone problem; indications and audio tones are problem; normal audio tone, indication problem. There are two possible causes of the control panel that is damaged or wiring on the control panel that has suffered damage. If the control panel is causing damage, then the control panel should be replaced. If wiring as the cause of damage, it is necessary to do continuity check on the wiring to know which wiring is damaged and should be repaired. After making repairs to the marker beacon component is done system test to make sure the components in the marker beacon have been successfully fixed and functioning normally.