Proses Pemisahan Debu Tembakau dari Pasir Pengotor dengan Fluidized Fixed Bed Menggunakan Pasir Silika
Separation Process of Tobacco Dust from Sand Impurities by Fixed Fluidized Bed with Silica Sand
Ummu Nikmatul Qomariyah, Atika Nabilla
The presence of impurity sand in tobacco dust is a hazardous material. Impurities in tobacco include iron sand and silica. The minimum level requirement from Sampoerna Company for the concentration of impurity sand in tobacco dust is, less than 5% (%wt). Therefore, it is necessary to separate impurities from tobacco using the fluidization method with the addition of sand as a dirt binder. The fluidization method is carried out with variations of the air velocity of 0,11 ; 0,16 ; 0,21 ; 26 ; 0,31 ; 0,37 m/s. With this speed variation, it can be determined at what speed the impurity sand and tobacco dust can be separated best. To determine the effect of the separation process, it is necessary to analyze the initial sample before the process and product sample analysis after the process. The analysis process was carried out by burning tobacco dust in an oven at 850 oC for 3 hours. And the results obtained that the impurity sand content is 37% with the assumption that during the combustion process all the combustion dust and only the impurity sand remains. To analyze the product sample after the sample separation process is carried out every 30 minutes, for 120 minutes. So for each speed variation requires 120 minutes of fluidization, with sampling at the top of the fluidization column 4 times. According to the results obtained with the lowest levels of 2% at a speed of 30 L/s within 120 minutes.