Preparation of High-Performance FO Membranes by Using Recycled Cigarettes Butt as Supporting Layer

Nadya Kusumawardhani

Cigarette butts (CBs), primarily composed of cellulose acetate, are a major environmental pollutant but offer potential as a sustainable material for membrane fabrication. This study explores the development of high-performance forward osmosis (FO) membranes using recycled CBs as the support layer. Through electrospinning, CB-derived nanofiber membranes were produced and further enhanced with zeolitic imidazolate framework-8 (ZIF8) and polyamide (PA) to improve structural integrity, fouling resistance, and filtration performance. The membrane with a CB:CA ratio of 1:4 (Sample A4) demonstrated superior fiber morphology, hydrophobicity, and chemical functionality, making it ideal for ZIF-8 incorporation. When tested in a FO system using distilled water as the feed solution and 1 M NaCl as the draw solution, the optimized membrane achieved a water flux of 24.93 LMH and a reverse salt flux of 3.23 gMH. The integration of ZIF-8 balanced hydrophobic and hydrophilic properties, reduced internal concentration polarization, and increased selectivity. The results suggest that combining CBs with advanced materials like ZIF-8 and PA can significantly improve FO membrane performance. This research demonstrates an effective approach to recycling hazardous waste into functional water treatment materials. By utilizing cigarette butts, the proposed membrane not only supports sustainable waste management but also provides a low-energy, high-efficiency alternative for clean water production in forward osmosis applications.

© 2026 UPA Perpustakaan POLINEMAStatus LayananKebijakan PrivasiSyarat & Ketentuan

v2026.11.18.2 · ee0bb0b