Analysis Of The Protection System Performance Trawas Feeder PT. PLN (Persero) Ulp Pandaan

Hilman Rangga Nugraha Hermawan

Abstrak

Feeder disorders generally occur due to various factors, both internal and external. The Trawas feeder deserve more attention in ULP Pandaan in the last few years because they have trip recloser problems. In this case, proper handling and solutions to the problems that occur are needed in order to create reliability. The purpose of compiling this final report is to minimize the occurrence of disturbances to feeders at ULP Pandaan. With the testing and analysis, it is hoped that it can provide conclusions and solutions to the trip problem on the recloser so that it can minimize or suppress the disturbance that occurs. This thesis aims to analyze the coordination of recloser, outgoing PMT and incoming PMT feeder, as well as analysis of current settings and the reliability index of these equipment in Pasuruan. From the results of the analysis obtained the OCR setting of protection equipment in the Trawas feeder was obtained by the Trawas Recloser with a current (primary) setting of 255.18 A and a TMS (normal inverse) setting of 0.07 then the Outgoing PMT setting for Trawas feeders obtained a current (primary) setting of 357.061 A and a TMS setting (normal inverse) of 0.4 and PMT Incoming settings for Trawas Feeders with current (primary) settings of 1818.65 A and TMS (normal inverse) settings of 1. Then Trawas DGR Recloser settings with current (primary) settings of 1.2 A and TMS (normal inverse) setting of 0.1 then Outgoing PMT setting obtained current (primary) setting of 2 A and TMS (normal inverse) setting of 0.2 and PMT Incoming Trawas Feeder setting with current (primary) setting of 5A and the TMS (normal inverse) setting is 0.3.

© 2026 UPA Perpustakaan POLINEMAStatus LayananKebijakan PrivasiSyarat & Ketentuan

v2026.11.20.5 · 33e0fa7