Monitoring dan Data Akuisisi pada 3D Printer Simetris Bilateral Mengguakan Matlab
Monitoring dan Data Akuisisi pada 3D Printer Simetris Bilateral Mengguakan Matlab
Abstract- Abstract - 3D printer can print an image or 3D design with a maximum size of 2m x 2m x 2m with a size of 3D printer that is so large it can print a large , get the maximum print out must have high precision so many use this machine one of them type CNC. When the 3d printing machine is operating, it is necessary to monitor the system to make it easier for the user to know the data when the printer is in the process of monitoring and retrieving data is still done manually The monitoring system located on the bilateral symmetrical 3D printer will be easy to know because the accuracy in the reading using the software matlab. Then what will be monitored is the temperature, current, and distance to know the data from the sensor during the printer's 3D work. The process of retrieving data is generally done by the operator in a manual way. Manual data retrieval has drawbacks including the time required for data logging, low data accuracy due to human error, and data storage process on perilable media. To overcome this, proper monitoring is required, one of which is to use MATLAB and data acquisition system can be done by processing analog data and digital data. In this study the results of temperature sensor readings on the extruder when the point set is 97°C then can be seen in matlab and DAQ monitoring according to the set point, then on the current ACS sensor at the bedplat when the temperature is 30°C on the current LCD display used 3.13 ampere the monitoring result also corresponds to the LCD display, and the encoder sensor in the Z axis when the distance of 5mm can be seen monitoring results according to the measured distance using sketchmatch.