Implementasi Kontrol PID Pada Water Heater Dalam Proses Pasteurisasi Susu Sapi Dengan Metode HTST (High Temperature Short Time)

Implementation of PID Control on a Water Heater in the Pasteurization Process of Cow's Milk Using the HTST (High Temperature Short Time) Method

MUHAMMAD SHOLEH

Pasteurization is a heating process with the aim of destroying pathogenic microorganisms in raw cow's milk by heating milk at high temperatures to maintain the nutritional quality of milk. Therefore, a pasteurization device was designed using the High Temperature Short Time method, which is the process of heating milk for 15 seconds at a temperature of 72˚C. Then the milk pasteurization process is carried out using a Proportional Integral Derivative controller to control the angular rotation of the MG966R servo motor mounted on the stove knob, so that the size of the stove flame can be controlled and the milk temperature read by the DS18B20 sensor will remain within the setpoint 72˚C. From the test results on ±8 liters of milk, the parameter values of Kp, Ki, and Kd with the Ziegler-Nichols type 2 method can be obtained, namely the value of Kp = 33, Ki = 1.83, and Kd = 144.37. And the resulting system response with the value of Rise Time (Tr) = 960 seconds, Peak Time (Tp) = 1267 seconds, and Settling Time (Ts) = 1274 seconds.

Kata kunci

© 2026 UPA Perpustakaan POLINEMAStatus LayananKebijakan PrivasiSyarat & Ketentuan

v2026.11.18.1 · 8c68a2b