Desain Sistem Kendali Mesin Pengering Gabah Vertikal Circulation Berbasis Arduino Kapasitas 500 Kg/Proses

Design Of Crude Drying Vertical Circulation Machine Control System Arduino-Based 500 Kg Capacity / Process

NAUFAL HAPREDA ANGGITARAMA

The most common grain drying process in Indonesia so far is by utilizing ligh from the sun. Another drying method developed is using a machine but many are still operated manually, so it can affect productivity. To overcome this problem, the ease operation of the engine becomes one of the considerations to be developed with an Arduino-based control system design. With the design of an Arduino-based control system, the aim is for temperature in the drying process become well controlled and increase the effectiveness of drying. This could be demonstrated by the community could operate and dry easily so they could produce good quality grain. The methods used in this design process are field studies and literature studies, initial design of control systems, determining input and output, wiring design, wiring trials, system design, system simulation, and drawing works. The results of implementation were in the form of an arduinobased vertical circulating grain drying control system with a capacity of 500 kg / process. The selling price of the control system is IDR 1,520,000 and the total selling price of the Circulation vertical grain dryer machine is set at IDR 14,404,000. The turning point (BEP) with bank loan interest is obtained when the grain drying reaches 38,284 kg which can be done in 32 effective working days.

© 2026 UPA Perpustakaan POLINEMAStatus LayananKebijakan PrivasiSyarat & Ketentuan

v2026.11.20.5 · 33e0fa7