Sistem Kontrol PID Pada Mixing Motor Cucurbita Powder Dilengkapi Dengan Load Cell Untuk Pengembangan LAB Kontrol

PID Control System On Motor Mixing Cucurbita Powder Equipped With Load Cell For Development Of LAB Control

MUHAMMAD ZENNUR ARIFIN

East Java Province has abundant agricultural products, namely pumpkin plants. Pumpkin plant (Cucurbita moschata Duch) belongs to the Cucurbitaceae family. In the processing of pumpkin into instant beverage products, it is necessary to have a filler which aims to prevent damage caused by microbes during boiling, besides fillers aim to speed up the boiling process and increase the volume. The weight of pumpkin juice becomes large when mixing the filler material, namely maltodextrin and tween 80. When mixing the pumpkin juice with filler material is still done manually, the process of mixing pumpkin juice with filler requires a stable rotating speed of the stirring motor, in order to get good and even results. To get a stable motor rotation, the PID method is needed, to eliminate the error value, then compare the set point value with the motor speed read by the rotary encoder sensor. One method used to control the speed of mixing motor is PID. The design of a PID controller using the Ziegler Nichols reaction curve yields a value of Kp = 17.05 Ki = 3.9 and Kd = 3.92. The results obtained include rise time (tr) of 39.7 s, settling time (ts) of 44.1 s, peak time (tp) of 44.2 s and Percent Overshoot (Po) of 1.16%. System response is better using Trial and Error with rise time (tr) of 10s, settling time (ts) of 15 s, peak time (tp) of 13 s and Percent Overshoot (Po) of 7.1% which have a Kp value of 0.01, Ki = 0.01 and Kd = 0.01. The results of the pumpkin juice mixing tool get the best system response to parameters with the trial and error method with a rpm of 600 and Kp = 0.01, Ki = 0.01 and Kd = 0.01 at a maximum load of 1kg.

© 2026 UPA Perpustakaan POLINEMAStatus LayananKebijakan PrivasiSyarat & Ketentuan

v2026.11.19.1 · c557b04